Connecting To An Internet Service Provider - NEC MOBILEPRO 750C - VERSION 1999 User Manual

Connecting to an Internet Service
Provider
Once you have established an account with an ISP and
gathered the necessary configuration information, you are
ready to create a connection on your MobilePro for your ISP
account.
Follow these steps to create a new connection for your ISP
account.
1. Tap Start, Programs, Communication, then select Remote
Networking.
2. Double tap the Make a New Connection icon.
3. Enter a name for the new connection.
4. Select Dial-Up Connection as the connection type and tap
Next.
5. Use the dropdown box to select Internal Modem on COM
4 and tap Configure.
6. Select the required port settings and call options. Tap OK.
7. Tap TCP/IP Settings and configure the required General
Settings and Name Servers. Tap OK.
8. Tap Next and enter the required dial-up telephone
number. Tap Finish.
Once your ISP connection is established you can configure
your MobilePro to send and receive email through your ISP.
Follow the instructions in "Sending and Receiving Email"
and "Activating a Connection," later in this chapter, to send
and receive email through your ISP.
Refer to Appendix C for selected ISP settings.
3-4 Setting Up a Remote Connection