Table of Contents
Advertisement
Connecting the Internal Modem
Follow these steps to connect an RJ-11 telephone cable to the
internal modem.
1. Locate the modem cover on the right side of the NEC
MobilePro and open it.
2. Carefully plug the RJ-11 telephone cable into the modem
connector.
Do not connect the internal modem to a digital
private branch exchange connector, or the digital
side of an integrated digital network. Use only
analog phone connections. Failure to do so may
result in explosion or fire and will damage your
modem.
During thunderstorms be sure to disconnect the
modem phone cable from the NEC MobilePro.
Failure to do so may result in explosion or fire.
3. Connect the other RJ-11 connector into an active (analog)
phone jack.
Now you are ready to create a connection for an ISP or RAS
account!
!
WARNING
Setting Up a Remote Connection 3-3
Advertisement
Table of Contents
