NEC MOBILEPRO 700 Quick Manual page 31

Removing a Compact Flash card
Transferring Data
With the MobilePro H/PC, you can send and receive data to and from another similarly equipped device using the infrared
(IrDA) communication port. Communicate with another MobilePro as follows.
Open the display panels on the two MobilePro units that you want to use for communication.
Position the MobilePro units so that communication ports face each other. Position the units from 0 to 20 inches apart.
Positioning the MobilePros
Be sure that nothing obstructs the path between the communication ports on both units, and that the ports are aligned
properly.
Send your data. (For details about the software procedures for transmitting data, see the software user's guide that came
with the unit.)
If the units are too far apart or if something blocks the path between the two ports, data may not be sent or received
correctly.
Connecting External devices
A number of external accessories come with your MobilePro to help you optimize unit performance. They include the
following:
AC Adapter
Direct Connection Cable
VGA Cable
Telephone Line
The following sections provide instructions for connecting these accessories.