Voice Recording - NEC MOBILEPRO 700 Quick Manual

Handheld personal computer

Hide thumbs Also See for MOBILEPRO 700:

Browse dialog box

Delete — removes the currently assigned application reference so you can select another application.

Enabling the LCD/Touch panel latch

You can configure your MobilePro H/PC to power on or off by simply opening or closing the display cover. The display

panel latch acts as a switch for both the power and the backlight.

Opening the MobilePro powers on the unit. To power on the unit while it is open, use the Power button.

Closing the MobilePro powers off the unit and insures that the backlight is off as well.

Use the following procedure to enable the LCD/Touch Panel latch.

Tap Start on the Taskbar to access Settings, then select Control Panel.

Double tap on the MobilePro Settings icon to launch the dialog box shown in the follwing figure.

Be sure you have the "Power Off" tab selected.

Power off settings

Select either to enable suspend mode with battery power or external AC power.

VOICE RECORDING

Recording Voice Memos with the MobilePro is easy, even with the unit closed:

Hold your MobilePro with the microphone facing you.

Press and hold the record button. A short beep will sound indicating that you should begin speaking.