NEC MOBILEPRO 700 Quick Manual page 29

MobilePro.
Removing PC Cards
Remove a PC card from the MobilePro as follows:
Save your data and power off the MobilePro.
Locate the PC card Eject button and press it to release the card from the slot.
Removing a PC card
Once the card is released, pull it the rest of the way out of the slot.
Compact Flash Cards
Your MobilePro comes with a Compact Flash card slot that supports one Compact Flash card. When using a Compact
Flash card in the MobilePro, we recommend that you also use AC power. The batteries alone may not provide enough
power for some Compact Flash cards to operate properly.
We recommend using the AC adapter when using Compact Flash cards. Using the adapter can help you avoid
potential data loss caused by the high-energy consumption of some Compact Flash cards.
Inserting Compact Flash Cards
Follow these procedures to install a Compact Flash card.
Save your data and power off the MobilePro.
With the Compact Flash card facing up, insert it into the Compact Flash card slot.