Problem Checklist - NEC VERSA L2300 Series User Manual

Table of Contents

Advertisement

Problem Checklist

First check the items in the following list. If these items don't help, see the table that follows
the list.
Power to the notebook is on.
The AC power outlet to which your AC adaptor is connected is working. Test the outlet by
plugging in a lamp or other electrical device.
All cables are tightly connected.
The display setting is configured correctly.
The display brightness control is adjusted properly.
If using battery power, check that the battery pack is properly inserted and fully charged.
Problem
Resolution
The notebook
If you are operating the notebook with battery power, check that the battery
does not power
pack is correctly inserted. Attach the AC adaptor to recharge the battery.
on
If you have the AC adaptor attached, check that you are using a working AC
power outlet.
LCD screen is
Power-saving mode has shut off the backlight. Press a keyboard key.
dark and blank
The built-in LCD may not be selected. Press specific function key once or
twice to select the LCD video mode.
Screen brightness needs adjustment. Use the specific functions keys.
The notebook entered Standby mode due to low battery power. Plug in the AC
adaptor before resuming operation.
Battery power
Use power-saving modes.
does not last
For more information, please refer to: Windows Vista
long
System Introduction
Electronic User's Guide.
Fully charge and discharge the battery several times to recondition it.
Replace the battery.
For more information, please refer to: Introducing Your NEC
VERSA
Introducing Your NEC VERSA
Electronic User's Guide.
Information on
Use the specific functions keys to adjust the brightness control.
the LCD is
difficult to see
Tilt the LCD screen slightly forward or backward.
An optional
Make sure the component is securely installed or connected.
component does
not work
Refer to the optional component documentation.
The
If the notebook does not enter Standby mode, a disk drive might be busy.
Standby/Resume
Wait until the disk drive stops and try again.
function does
not work.
If notebook does not resume, it may have auto suspended on a low battery.
Attach the AC adaptor and try again.
Managing System Power in this
Using the Battery ; and
Replacing the Battery in this
®
Operating
Page
30
Page
19
Page
21
63

Advertisement

Table of Contents
loading

Table of Contents