Dialing A Number In Message Text; Volume Controls; Voice Mail; Forwarding Calls - NEC 232 Manual

Dialing a Number in Message Text

To call a phone number within the message text at the Message view screen:
*
Press (Down) navigation key to highlight the phone number in the message text.
Press Send to dial the phone number or press Softkey 1 (Select) and, from the Options menu, select either Call (to dial the number) or Message (to
send a text message).

Volume Controls

To silence the ringer when receiving a call, the Ring silencer option must be set On.
*
(With flip CLOSED) Press a volume button on the side of the phone. Open the flip and press
(With flip OPEN) Press any key except the Send, End/On-Off, Softkey 1, or Softkey 2.
When receiving a call with the flip OPEN, press the volume buttons on the side of the phone to silence the ringer.
To change the earpiece volume during a call:
*
The flip cover must be open and press the buttons on the side of the phone. Press the Up button (nearest the hinged end of the base) to increase volume and press
the Down button (nearest the charger connector) to decrease volume.
The volume buttons may be used to increase or decrease ringer volume when the hands-free accessory is connected.
During an incoming message, the volume buttons on the side of the phone adjust the ringer volume.
During the clock's daily alarm or a Scheduler alarm, press a volume button on the side of the phone to silence the alarm, if the Ring silencer option is set.

Voice Mail

The voice mail message icon displays in the icon status bar to notify you of a new voice mail. The icon remains displayed until you access voice mail to listen to your
message. (See Flag.)
*
Press and HOLD 1 at least two seconds to access your voice mail.
Refer to the Messaging and Voice Mail section on page 76 for more voice mail information.
Refer to Voice Mail settings on page 79 to set up your voice mail number.

Forwarding Calls

All call types may be forwarded to a designated number or each call type may be forwarded to different designated numbers. Call forwarding is established in the Call
settings sub-menu of Settings menu (see page 44).
When call forwarding is set on, unanswered calls are forwarded to the designated number.
28
(Send) to accept the call, and begin your conversation.
Voice mail icon: