SMC Networks SMC7904WBRA-N2 - User Manual page 74

Step10 In this page, it displays the information about the IPoA settngs. Click
Apply/Save to save and apply the settings. You can modify the settings
by clicking the Back button if necessary.
Adding a Bridge WAN service
This section describes the steps for adding the Bridge WAN service.
Step1 In the Wide Area Network (WAN) Service Setup page, click the Add
button to display the following page. (At first, you must add a proper ATM
configuration for this WAN service.) Click the Add button to display the
following page.
Step2 Select the proper ATM Interface, for example atm3/(0_0_39) and then
click Next to display the following page.
User Manual
70