SMC Networks SMC7904WBRA-N2 - User Manual page 53

In this page, you are allowed to add, remove, or edit a WAN service.
Adding a PPPoE WAN Service
This section describes the steps for adding the PPPoE service.
Step1 In the Wide Area Network (WAN) Service Setup page, click the Add
button to display the following page. (At first, you must add a proper ATM
configuration for this WAN service.)
Step2
In this page, you can select a ATM Interface for the WAN service. After
selecting the ATM interface, click Next to display the following page.
User Manual
49