SMC Networks SMC7904WBRA-N2 - User Manual page 20

Figure 3 Connection diagram (Without connecting telephone sets before the splitter)
Connection 2
Figure 4 displays the connection when the splitter is installed close to the router.
Figure 4 Connection diagram (Connecting a telephone set before the splitter)
Note:
When connection 2 is used, the filter must be installed close to the telephone
cable. See Figure 4. Do not use the splitter to replace the filter.
Installing a telephone directly before the splitter may lead to failure of connection
between the device and the central office, or failure of Internet access, or slow
connection speed. If you really need to add a telephone set before the splitter, you
must add a microfilter before a telephone set. Do not connect several telephones
before the splitter or connect several telephones with the microfilter.
User Manual
16