SMC Networks GS501 - User Manual page 8

Introduction
SMCGS501/SMCGS801 is a powerful, high-performance Gigabit Ethernet switch,
with 5/8 ports capable of 10/100/1000 Mbps auto-negotiation operation (NWay),
which means the switch could automatically negotiate with the connected partners on
the network speed and duplex mode. It is ideal for micro-segmenting large networks
into smaller, connected subnets for improved performance, enabling the bandwidth
demanding multimedia and imaging applications. Moreover, the 10/100/1000Mbps
auto-sensing ability provides an easy way to migrate 10/100Mbps to 1000Mbps
network. Compared to the shared 10Mbps or 100Mbps networks, the switch delivers
a dedicated 10/100/1000Mbps connection to every attached client without
bandwidth congestion issue. This switch also supports auto MDI/ MDI-X function.
Each port could be used to connect to another switch or hub without crossover RJ-
45 cable.
Store-and-forward switching mode promises the low latency plus eliminates all the
network errors, including runt and CRC error packets. To work under full-duplex
mode, transmission and reception of the frames can occur simultaneously without
causing collisions as well as double the network bandwidth. Moreover, Pre-IEEE
802.3az Energy Efficient Ethernet is supported to save power consumption
The switch is plug and play without any software to configure and also fully
compliant with all kinds of network protocols.
Before you start to install the switch, check the following contents in this package：
1. One 5/8–Port Gigabit Ethernet switch
2. One external power adapter
3. Four rubber feet
4. User's Manual
5. Warranty Card
6. Quick Install Guide
7