I
NSTALLING THE
Verifying Port Status
The front panel of the switch provides status LEDs for "at-a-glance"
system monitoring. The following table details the functions of the various
indicators:
Port and System Status LEDs
LED
Power
Ports
Link/Act
1000M
10/100M
Verifying System Operation
Verify that all attached devices have a valid connection. The switch
monitors the link status for each port. If any device is properly
connected to the switch and transmitting a link signal, the port
8
S
WITCH
EZSwitch 10/100/1000
EZSwitch 10/100/1000
8508T
8508T
Condition
On
On
Off
Flashing
On
Off
On
Off
Status
The switch is receiving power.
The port has established a valid network
connection.
The port has not established any network
connection.
Traffic is passing through the port.
Indicates that the port is transmitting or
receiving data at 1000 Mbps.
No link up at 1000M.
Indicates that the port is transmitting or
receiving data at 100 Mbps.
Indicates that the port is transmitting or
receiving data at 10 Mbps.