Installing The Switch; Package Contents; Mounting The Switch - SMC Networks 8505T User Manual

I
Before installing the switch, verify that you have all the items listed under
"Package Contents." Note that this switch can be installed on any suitably
large flat surface or in a standard EIA 19-inch rack.

Package Contents

The EZ Switch 10/100/1000 includes:
• EZ Switch 10/100/1000 (SMC8505T or SMC8508T)
• Four rubber foot pads
• Rack-mount bracket kit
• SMC Warranty Registration Card

Mounting the Switch

This switch can be placed directly on your desktop, or mounted in a rack.
Before you start installing the switch, make sure you can provide the right
operating environment, including power requirements, sufficient physical
space, and proximity to other network devices that are to be connected.
Verify the following installation requirements:
• Power requirements: 100 to 240 VAC (± 10%) at 50 to 60 Hz (± 3Hz).
The switch's power supply automatically adjusts to the input voltage
level.
• The switch should be located in a cool dry place, with at least 10 cm (4
in) of space on the sides for ventilation.
• Place the switch out of direct sunlight, and away from heat sources or
areas with a high amount of electromagnetic interference.
NSTALLING THE
• Appropriate DC power adapter
• This User Guide
S
WITCH
3