Logging Facility - SMC Networks 7824M/FSW - annexe 1 Management Manual

Command Mode
Global Configuration
Command Usage
Use this command more than once to build up a list of host IP
addresses.
The maximum number of host IP addresses allowed is five.
Example
Console(config)#logging host 10.1.0.3
Console(config)#

logging facility

This command sets the facility type for remote logging of syslog messages.
Use the no form to return the type to the default.
Syntax
[no] logging facility type
type - A number that indicates the facility used by the syslog server
to dispatch log messages to an appropriate service. (Range: 16-23)
Default Setting
23
Command Mode
Global Configuration
Command Usage
The command specifies the facility type tag sent in syslog messages.
(See RFC 3164.) This type has no effect on the kind of messages
reported by the switch. However, it may be used by the syslog server to
sort messages or to store messages in the corresponding database.
Example
Console(config)#logging facility 19
Console(config)#
E L
VENT OGGING
C
OMMANDS
19-39