Table of Contents
Advertisement
Click Apply Changes to save the settings of this page.
3.7.7
Port Mapping
Choose Advance > Port Mapping. The page shown in the following figure appears. In this page, you can bind the
WAN interface and the LAN interface to the same group.
The procedure for manipulate a mapping group is as follows:
Step 1 Select Enable to enable this function.
Step 2 Select a group from the table.
Step 3 Select interfaces from the WAN and LAN interface list and add them to the grouped interface list using the
arrow buttons to manipulate the required mapping of the ports.
Step 4 Click Apply Changes to save the changes.
46
Advertisement
Table of Contents
