Connecting The Hardware - SMC Networks 7401BRA V.2 Quick Installation Manual

1

Connecting the Hardware

Warning: Before you begin, turn the power off for all devices.
These include your computer(s), your LAN hub/switch
(if applicable), and the ADSL Barricade
Step 1. Connect the ADSL cable
Connect one end of the provided phone cable (RJ-11) to the port
labeled DSL the Rear Panel of the device. Connect the other end
to your wall phone jack.
Note: ADSL splitters/microfilters are included with some models.
Step 2. Connect the Ethernet cable
If you are connecting a LAN to the ADSL Barricade
end of a provided Ethernet cable to a regular hub port and the
other to the Ethernet port on the ADSL Barricade
using the ADSL Barricade TM with a single computer and no hub,
you must use an Ethernet cable to attach the PC directly to the
device.
7
TM .
TM , attach one
TM . If you are
Step 3. Attach the power connector
Connect the AC power adapter to the Power connector on
the back of the device and plug in the adapter to a wall outlet
or power strip.
Step 4. Power up your systems
Turn on and boot up your computer(s) and any LAN device such
as hubs or switches.
8