Page 1
Manual Cordless drill/driver 13 mm 20 V 1/2” Chuck Applies for: Codes Models 103249 TALI-20A2 103250 TALI-20AS TALI-20A2 TALI-20AS Read this manual thoroughly CAUTION before using the tool.
Warranty policy Usage and care recommendations Charge the battery only with the included charger or its equivalent specified by TRUPER. Follow the battery usage considerations (page 7 and 8). Follow the operation and functions instructions (pages 9 and 10). Keep the ventilation slots of the tool and charger clean.
Avoid the risk of electric shock or severe injury. When the power cable gets damaged it should only be replaced by the manufacturer or at a TRUPER Authorized Service Center. The build quality of the electric insulation is altered if spills or liquid gets into the tool while in use.
Service Repair the tool in a TRUPER Authorized Service Center using Prevent unintentional starting up. Ensure the switch is in the only identical spare parts. “OFF” position before connecting into the power source and / This will ensure that the safety of the power tool is maintained.
• Only recharge the battery with the charger specified by materials. When not in use, keep batteries away from any TRUPER. Do not use any charger that is not specifically metallic objects such as clips, coins, keys, nails, screws, or provided for use with the equipment.
• Ensure that the connection between the battery charger • Charge only batteries of the same model provided by and the battery is correctly positioned and not obstructed TRUPER and of models recommended by TRUPER. by foreign objects. Parts Torque...
Start up NOTE: Before using the tool, read the instruction manual carefully. The machine is intended for screwing and unscrewing, as well as drilling into wood, metal, and plastic. Battery charging WARNING The charger and batteries are 2. If the battery overheats, remove it from the charger specifically designed to work together, do not attempt to use and allow it to cool before recharging.
Start up Battery status check The battery level can be determined by the battery indicator light when pressing the button next to the lights. On/off switch Press the on/off switch (2) to turn on and release it to stop the drill. The on/off switch is equipped with a brake function that stops the drill immediately when the switch is released.
Start up Two-speed control Switch lock The trigger switch can be locked in the OFF The drill features a two-speed control designed for drilling or screwing at LOW (mark 1) or HIGH (mark 2) position. This reduces the possibility of accidental starts when not in use.
Start up Using the LED light Torque adjustment To turn on the light, simply press the on/off switch. The torque is adjusted by turning the torque When you release the on/off switch, the light will turn off adjustment ring. The torque is higher when the after 10 seconds.
Start up Overload protection Temperature-dependent overload protection When overloaded, the engine stops. Immediately relieve the machine load and allow it to cool for When used as intended, the power tool cannot be around 30 seconds at the highest unloaded speed. subject to overload.
Cleaning and care Service • Keep the vents clean and free from obstructions to Tool servicing should only be carried out at a TRUPER ensure proper motor cooling. Authorized Service Center. Service and maintenance • Regularly inspect all mounting screws and ensure they performed by unqualified persons can be dangerous and are tightened correctly.
Authorized service centers In the event of any problem contacting a TRUPER Authorized Service Center, please see our webpage WWW.TRUPER.COM to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
It includes the costs of transportation of the product that derive from its fulfillment of its service network. Phone number 800-018-7873. Made in China. Imported by TRUPER, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Phone number 761 782 9100.
Need help?
Do you have a question about the PRO TALI-20A2 and is the answer not in the manual?
Questions and answers