Icom IC-A21 Instruction Manual page 28

SOLUTION REF.
e Charge the battery pack.
e Rotate [SQL] clockwise. p. 13
e Charge the battery pack.
e Charge the battery pack.
e Select the COM band frequency.
e Select High output power.
e Turn OFF the keyboard lock function.
e Seiect DVOR mode
€ set t [SQL] at the threshold point.
c Turn OFF the keyboard lock functicn.
Ld
m
@ Push and hold
& Then turn power ON.
e The battery pack has been Cischarged.
PROBLEM POSSIBLE CAUSE
NO power comes on.
No sounds comes from the
speaker.
e [SQL] is turned too far counter-
clockwise.
e The battery pack has been dischargec
No transmitting possible or | eThe 0 pack has been discharged.
only low power can be used. | 'e NAV bend or Weather channel is
xe
e Low power ۱5 0.
Frecuency cannot be set. e The keyboard lock function is activated.
e CDI mode is selected.
Scan does not cperate. e [SQ is not set correct}
e The keyboard lock function is activated.
f} Turn power OFF.
2) While pushing [F] and [CLR], turn power ON.
25