Icom IC-A21 Instruction Manual page 24

5) The course deviation needle appears on the func-
tion display when your aircraft is off course to the
VOR station.
C»
) To select the DVOR mode, push [F] and then [1].
e Another VOR station cen be selected.
VOR INDICATOR NOTE
"LOC" appears on the function display as shown
below when 2 focelizer signal is receivec.
IR station
O VOR NAVIGATION
station.
and set the frequency of the
station. on a VOR radial from the VOR
away from the VOR station.
e To select "TO," push [F] and then [2}.
e Tc select "FROM," push [F] and then [3].
۱6 using the course
r t i Da
S a two-degree
| Correct vour aircraft heacin
indicator; each- arrow represents
deviation.
"OFF" when either your
the VOR station or the
rom
tion Indicator ۰
e The course indicator shows
aircraft is too far away f
frequency is not set correctiy at the VOR station.
selected, the opera-
To set the
NOTE: When CDI m
ting frequency cann
operating frequency, select DV
N3
arent
C23
o
21