Table of Contents
Advertisement
IMPORTANT INFORMATION
Please read this information carefully and follow all the instructions outlined below.
This will ensure the reliable operation and long service life of your navigation radio.
Keep the packaging and operating instructions in a safe place in order to pass them on
to a subsequent owner in the event of selling the unit at a later date.
A
Only trained personnel may install the unit.
A
Observe automotive industry quality standards.
A
Fire hazard. When drilling, take care not to damage concealed wiring harnesses, the
fuel tank or fuel lines.
A
Never drill into supporting or safety-relevant body parts.
A
Only install the unit in vehicles with a 12-V on-board voltage; connect negative pole to
earth. Installation in unsuitable vehicles (e. g. heavy goods vehicles, buses) results in a risk
of malfunction, damage and fire.
A
Always ensure correct assignment of vehicle connections. Incorrect assignment of the
connections may damage the unit or the vehicle electrical system/ electronics.
Installation in vehicles equipped with standard ISO
connectors
The navigation radio may be installed without major preparation in vehicles equipped
with ISO standard connectors. A few signals may have to be routed to ISO plug A (re-
fer to connection overview of ISO chamber A).
For problem-free installation on vehicles with different connection requirements, ask
your dealer for special cables.
Installation in vehicles without standard ISO connectors
If no adapter leads are available for your vehicle, connect the navigation radio as de-
scribed in "Electrical connections".
Taking safety precautions, Fig. 1
A
Before starting work, disconnect the earth lead from the negative terminal of the vehi-
cle battery in order to prevent short circuits. In this process, observe the vehicle manufac-
turer's safety instructions (alarm system, airbag, immobiliser, etc.).
Installation instructions
1
Advertisement
Table of Contents
