Default Settings; System Information - VDO MS 4150 RS Installation And Owner's Manual

Language
Choose one of the two languages loaded in the system,
or:
Select "
language from the system software CD (included).
Select the language to be replaced.
:
You will be prompted to insert the software CD.
Insert the language CD in the CD player of the radio.
Follow the system instructions for loading other languages.
Turn now advice
If this option is activated, an additional prompt (e.g. "Now turn right") will be output
directly before a turn-off.
This prompt is activated by default.
Measuring units
Choose between the following units of measurement for distance:
–
Metric: Display in kilometres and metres.
–
Anglo: Display in miles and yards.
–
American: Display in miles, half and quarter miles and feet.

Default settings

Select this option in order to reset all user-defined settings to their default values. All
entries in the address book will remain stored.
Mounting angle
To adapt the navigation computer to the mounting angle of the radio in the
dashboard (gyro-sensor compensation). This adjustment need only be made once after
the installation of the radio. See "Setting the mounting angle",
Service
For diagnosing hardware and software problems (code-protected).
The option "
performed by an authorised service company.

System information

The "
hardware version (for service purposes).
" to replace one of the two loaded languages with another
" is exclusively reserved for service work on the navigation radio
" menu displays information about the software and
NAVIGATION
page 13.
65