Activating Products - VDO MS 4150 RS Installation And Owner's Manual

Activating products

Once you have received your enable code, enter it into the system.
In the main control menu, select " C-IQ" then "Code Input".
The cursor appears automatically on the first digit
of the code.
Press the right rotary control to activate each digit
in the code.
Next, turn the right rotary control to select the
correct code digit and confirm your selection by
pressing the right rotary control.
✎
You may change any of the code digits at any time by moving the cursor to the
required position in the code and pressing the right rotary control.
Once the code is complete, the cursor will automatically move to "OK". Confirm by
pressing the right rotary control.
Once you have entered a correct code, the system will display information about
the C-IQ products you have just activated.
✎
The system will inform you if an incorrect code has been entered, and/or if your
system software is not capable of processing the encrypted information.
In these cases, select either "OK"or "C-IQ Service", if you wish to establish contact,
and confirm by pressing the right rotary control.
It is possible to operate the system without activation. Destinations can be entered.
Navigation information, however, will only be provided for activated areas and for
activated services.
My C-IQ
You have the choice of obtaining information about your activation status at any time.
Select "My C-IQ" in the "C-IQ" menu.
Select "Active products" if you wish to find out more about the products you
have activated.
Select "Starting soon" if you wish to view details of products you have received
which will soon be active.
Select "Expiring soon" if you wish to find out which service products you currently
have in use and for how long they will continue to be available.
Select "Revocated products" to view a list of products which have been revocated.
C-IQ – INTELLIGENT CONTENT ON DEMAND
Code Input
8 Q R 5 - Z 4 A K
G 6 _ _ - _ _ _ _
OK Quit ?
39