Sound Settings; The "Sound" Menu - VDO MS 4150 RS Installation And Owner's Manual

The "SOUND" menu

In the " " menu, you can set your navigation
radio's sound and several other sound reproduction
parameters to your own preferences.
The sound settings for bass and treble/tone are valid
for the currently active sound source (radio, CD or
CDC).
Press the SOUND button.
:
The " " menu is displayed.
The following options are available:

Sound settings

Select the desired option by turning the right
rotary control.
Press the right rotary control in order to activate
the setting.
Move the slide control to the desired setting by
turning the right rotary control.
Press the right rotary control in order to store
the setting.
–
: Setting the bass (low tones).
–
: Setting the treble (high tones).
–
: Setting of volume balance left <–> right.
–
: Setting the volume distribution rear <–> front.
Slide control left: rear
Slide control right: front
Sound settings cannot be performed for navigation information, traffic
announcements and telephone operation.
Loudness
Activate this function to increase low and high tones at low volume settings.
Selecting one of the pre-set sound styles deactivates the loudness function.
Sound Style
Select one of the pre-set sound styles.
Select " " to retain your own bass and treble settings.
For each sound source, the sound style is stored separately.
SDVC (speed-dependent volume increase)
To compensate for environmental noise, the volume for audible information increases
as a function of the speed.
Choose a setting for the speed-dependent increase of the volume.
Select to deactivate the function or select to
increase. 1 is the lowest, 5 the highest volume increase.
SOUND SETTINGS
to choose the desired volume
27