Wacom PHU-111 Manual

Supplied accessories

Getting to know the product

1. Bluetooth status LED
2. Application status LED
3. Speaker
4. Battery status LED
5. Start / Finish button
6. Paper area
7. USB/BT mode selector
8. Pen tether hole
9. USB plug cover
10. Pen compartment
11. Power button
12. Charging contacts

LED indicator

Pen storage compartment and pen tether

• Keep the pen in the compartment.
  
• Pen tether hole
  

Getting started with your mobile device or PC

• Download the CLB Paper application to your mobile device or PC.
  

Bluetooth mode

1. Slide the switch to BT mode
   
2. Charge the PHU-111 for at least 2 hours
   
3. Press the power button to turn on the PHU-111
   
4. Open the CLB Paper application
   

USB mode

1. Slide the switch to USB mode
   

2. Connect the PHU-111 to a PC via USB
   
3. Open the CLB Paper application
   

Getting started with CLB Paper

• Open the clip and insert your document
  Align your document with the upper left corner of the PHU-111
  
• Confirm that the correct document appears on your mobile device or PC
  

• Push the Start button to start the application Begin writing when the application status LED is ON
  

• When the document is completed, press the Finish button
  An alert will sound if you begin writing before the application is ready.
  

To get started with your Wacom Clipboard
http://business.wacom.com/start

Wacom Support / Wacom Customer Service
For support and to register your product, go to wacom.com and click on Support.