Initial Settings - VDO CD 3100 User Instructions

INITIAL SETTINGS

It is possible to modify many of the set's initial settings according to your preferences.
Enter the Initial Settings menu.
1
2 Select one of the options you want to modify.
3 Alter the chosen option.
- Select the temperature format
(when a temperature sensor is connected).
NO to disable function, or choose
between the display or warning in degrees
CELSIUS or FARENHEIT.
Only when connected and calibrated,
see SDVC and Speed Warning
in 'SPECIAL FUNCTIONS'.
- Activate / Deactivate speed warning.
- Select the speed dependent volume
control level.
- Select the telephone function (if connected).
MUTE if your phone only interrupts
the set's volume and IN if your phone
provides a loudspeaker connection.
NO if none connected.
- If IN or MUTE were selected
for telephone function set detection level
of the signal delivered by your car kit.
LOW in most cases.
- Activate / Deactivate the ON/OFF
logic to limit the use of the set to 1 hour
after the key has been removed.
- Activate / Deactivate the security light.
- Activate / Deactivate dynamic loudness.
- Select the frequency threshold
of the low notes.
- Select the frequency threshold
of the high notes.
- Activate /Deactivate the automatic leveller
between the different sources.
20
INIT
PRESET +
SEARCH
TRACK
PRESET -
PRESET +
SEARCH
TRACK
PRESET -
TEMP [NO, CELSIUS, FAHRENH]
SPEED [NO, KM/H, MPH]
SDVC [OFF, 1, 2, 3, 4]
PHONE [NO, IN, MUTE]
PHONE [LOW, HIGH]
LOGIC [ON, OFF]
LED [ON, OFF]
LOUD [OFF, AUTO]
BASS FREQ [80, 40]
TREB FREQ [5K, 7K]
LEVELER [AUTO, OFF]