Surface Maintenance - Pacific PRO PHBX5670 Operating Instruction

Surface Maintenance

Surface Maintenance
1. Please clean the range hood surface regularly with warm soapy water and wipe with a cotton cloth
to prevent grease from accumulating.
2. Please do not use harsh cleansers or coarse material to clean the surface because that will damage
the surface.
3. A non-invasive stainless steel polish is recommended to polish the surface after cleaning.
4. Please use soft cloth for polishing because it will make your range hood surface shinier.
5. Please do not use cleaning solutions that have bleach as an ingredient.
Surface Cleaning and Maintenance
1. Always disconnect from power supply before cleaning.
2. Clean both exterior and interior of the hood for long lasting. Do not use abrasive cleanser.
3. The stainless steel baffle filters are intended to trap residue and grease from cooking. Although
the filters should never need replacing, they are required to be cleaned every 30 days or more
often depending on cooking habits. Filters may be placed in dishwasher at low heat or soaked
in hot soapy water Dry filters and re-install before using hood.
4. The oil cup in the center of the hood for holding grease can be detached and cleaned regularly.
5. Make a habit of turning on the range hood first before turning on the stove to avoid high
temperature in the kitchen.
Remarks
Precautions:
1. The range hood must be turned on every time before cooking to ensure maximum ventilation effect.
If there is damage to the power cord, removing.
2. Changing the power cord must be handled by the manufacturer, installer or a qualified electrician.
3. When the range hood, gas stove or other fuel appliances are being used simultaneously, there must
be good ventilation in the kitchen.
4. If cleaning the range hood is conducted without following the instructions in the manual, you may risk
causing a fire.
5. Do not light a fire directly under the range hood.
6. The exhaust gas from the range hood can't be fed into the exhaust channel of the gas stove or any
other appliances.
7. The minimum distance required between the top of the stove and the bottom of the range hood is
400mm. If the range installation manual states that more distance are required, it must be taken
into consideration. Adjust range hood to appropriate height for complete emission of exhaust.
8. To avoid danger,parts in the range hood must be disassembled with tools,and not using bare hands.
18