ramia Diamond 1500 Assembly Instructions

Attention:
Workbench is made of high quality beech wood guaranteeing maximum resistance and long service life of the bench.
Like all solid wood products it must not be left in areas of high humidity or damp that will cause natural
movement. Recommended humidity level max. 60%.
Your workbench (bench top) was lightly treated by varnish to protect the bench during shipping and storring. We
recommend you to treat your bench by colourless varnish or oil including the bottom of workbench within 4 weeks
after assembly. Varnish (oil) prevents absorption of surrounding moisture. Don´t forget to repeat surface treatment
each year. If you prefer to use oil or Wood wax, we recommend to regrind the bench top.
To increase the rigidity of your workbench ensure that you glue the joints and bolt the bench in possiton.
Wood is and natural product, check and tighten all screws and bolts every 6 monhts. Wood is and natural product, check and tighten all screws and bolts every 6 monhts.
Recommendation: Use your own proven glue to assemble the workbench. The supplied glue only works properly in
suitable conditions.
Warning: Heavy item (over 110 lbs) - be careful during assembly and ask someone for help with the heaviest
pieces.
!!! ATTENTION !!! When buying this workbench with a cabinet, first check the cabinet
instructions. The assembly of the bench base is different when the cabinet is used.
Assembly video
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
Assembly Instructions HB-D1500, HB-D1800