ramia HB-D1500 Assembly Instructions

Assembly Instructions - HB-D1500, HB-D1800

Attention:

Workbench is made from high quality beech wood guaranteeing maximum resistance and long service life of the
bench.
NOTICE:
•The bench must not be left in damp or humid conditions which will cause movement in the wood. Recommended
humidity level max. 60%.
•If you bought workbench without surface treatment, we recommend you to finish the bench by colourless varnish
or oil including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture. Don´t forget
to repeat surface treatment each 6 months including holes for bench dogs.
•To increase the stability of your workbench we recommend you to bolt the bench to the floor.
•Each 6 months tighten all screws and bolts •Each 6 months tighten all screws and bolts
Parts Packing 1
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
.
.
Packing 2 Date