ramia SCHOOL Series Assembly Instructions

A1-12pcs A2-32pcs
12x40mm 10x40mm
E2-16pcs E3-4pcs
M8 M10
Attention:
ENG
Workbench is made of high quality beech wood guaranteeing maximum resistance and long service life.
NOTICE:
The bench must not be left in damp or humid conditions which will cause movement in the wood. Recommended
humidity level max. 60%.
If you bought workbench without surface treatment, we recommend you to finish the bench by colourless varnish or
oil including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture. Don´t forget to
repeat surface treatment each year including holes for bench dogs.
To increase the stability of your workbench we recommend you to bolt the bench to the floor.
Each 6 months tighten all screws and bolts.
Ramia s.r.o., Czech Republic, Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
Assembly Instructions - SCH-X
B1-6pcs B2-8pcs C1-12pcs
5x90mm 4x20mm M10x100
F-4pcs G1-8pcs
Vice
fitting kit
4x40 mm
C2-4pcs C3-8pcs D1-80psc
M10x120 M8x100
G2-8pcs G3-8pcs G4 - 16pcs
M5x25mm M5
D2-4pcs
M10 M10
G5 - 4pcs
Vice
attaching
Wooden protectors
wood
8x60mm
E1-12pcs
M10
G6 - 8pcs