Troubleshooting - Bosch WQB245B0TC User Manual And Installation Instructions

en Troubleshooting

Troubleshooting

18 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
Never make any technical modifications to the appliance or its features.
▶
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The display goes out
and flashes.
"Hot" and the drum ro-
tates.
and programme ter-
minated.
"CArE"
42
Cause and troubleshooting
Energy-saving mode is active
Press .
▶
Not a fault. The cooling process is active.
No action required.
Note: Do not change the programme during the cool-
ing process. The cooling process takes up to 10
minutes.
The condensation container is full.
Empty the condensation container. → Page 32
▶
The water outlet hose is not connected correctly, or is
kinked or trapped.
Check the installation of the water outlet hose.
▶
→ Page 14
Water outlet hose is blocked.
Rinse the water outlet hose with tap water.
▶
The filter for the condensation tank is soiled.
Clean the filter for the condensation container.
▶
→ Page 41
The basic appliance care programme should be run.
Run the basic appliance care programme
▶
→ Page 38.
Fluff filter is soiled.
Clean the fluff filter. → Page 30
▶