Basic Settings; Tings; Changing The Basic Set- Tings; Appliance Care - Bosch WQB245B0TC User Manual And Installation Instructions

¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.

Basic settings

15 Basic settings
You can configure the basic settings
Basic settings
for your appliance to meet your
needs.
Note: You can also adjust the basic
settings in the Home Connect app.
15.1 Overview of the basic
settings
Note: Additional functions may be
available as a result of software up-
dates.
→ "Installing the software update",
Page 35
If a software update is available, you
can find further information in the
Home Connect app.
Programme selector with programme
positions
Set the volume of the signal
1
at the end of the programme:
0 (off) to 4 (very loud)
Set the volume of the signal
2
tone emitted when the but-
tons are pressed:
0 (off) to 4 (very loud)
Set the display brightness:
3
1 (low) to 4 (very high)
Adjust the dryness level
4
→ Page 33:
0 (dry) to 3 (driest)
Start the basic (CP1) or in-
5
tensive (CP2) appliance care
programme.
→ "Appliance care", Page 38
Display the number of started
6
programmes (PC).
Restore the appliance to the
7
factory settings (rES).
15.2 Changing the basic set-

tings

To call up the basic settings, press
1.
設定.
Use the programme selector to se-
2.
lect the required basic setting.
→ Page 37
Adjust the basic setting:
3.
Basic settings en
1
2
3
4
5
6
7
37