Advertisement
14.1 Setting up the
Home Connect app
Install the Home Connect app on
1.
your mobile device.
Start the Home Connect app and
2.
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
14.2 Setting up Home Con-
nect
Requirements
¡ The Home Connect app has been
installed on your mobile device.
¡ The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
Press and hold 遠端遙控 for ap-
1.
prox. 3 seconds.
Follow the instructions in the
2.
Home Connect app.
14.3 Activating Wi-Fi on the
appliance
Press and hold 遠端遙控 for ap-
1.
prox. 3 seconds.
Press 遠端遙控 repeatedly until
2.
the display shows "oFF".
Press
to activate the Wi-Fi.
3.
a The display shows "on".
Notes
¡ If the Wi-Fi is activated, the display
alternately shows "on" and the sig-
nal strength of the Wi-Fi connec-
tion.
¡ To exit the Home Connect settings,
press and hold 遠端遙控 for ap-
prox. 3 seconds.
14.4 Deactivating Wi-Fi on the
appliance
Press and hold 遠端遙控 for ap-
1.
prox. 3 seconds.
Press 遠端遙控 repeatedly until
2.
the display shows "on".
Press
to deactivate the Wi-Fi.
3.
a The display shows "oFF".
Note: To exit the Home Connect set-
tings, press and hold 遠端遙控 for
approx. 3 seconds.
14.5 Installing the software
update
Note: If a software update is avail-
able, a message appears in the
Home Connect app.
To install the software update, fol-
▶
low the instructions in the
Home Connect app.
a The control panel is partially
locked during the installation.
a In the event of a malfunction, in-
stallation may take up to
40 minutes. Do not reset the net-
work settings or the appliance to
the factory settings.
14.6 Resetting the appliance
network settings
Press and hold 遠端遙控 for ap-
1.
prox. 3 seconds.
Press 遠端遙控 repeatedly until
2.
the display shows "rES".
Press and hold
3.
3 seconds.
a The network settings are reset.
Home Connect en
for approx.
35
Advertisement
Need help?
Do you have a question about the WQB245B0TC and is the answer not in the manual?