en Installation and connection
If residual water in the appliance
freezes, this may cause damage to
the appliance.
Do not install or operate this appli-
▶
ance anywhere that is liable to ex-
perience frost or outdoors.
If the appliance is operated immedi-
ately after transportation, the refriger-
ant contained in the appliance may
result in damage to the appliance.
Immediately after transporting the
▶
appliance, leave it to rest for two
hours before putting it into opera-
tion.
Installation loca-
tion
On the floor
14
Requirements
Place the appli-
ance on a clean,
level and firm
surface.
Align the appli-
ance
→ Page 17.
Installation loca-
tion
In a washer-dryer
stack
Against a wall
4.4 Water outlet hose
Condensation that forms in the appli-
ance as it dries the laundry is collec-
ted by default in the condensation
Requirements
Only use the ori-
ginal connection
set from the
dryer manufac-
turer when set-
ting up this appli-
ance in a
washer-dryer
stack.
¡ Connection kit
→ Page 28
This appliance
must only be
stacked on a
washing machine
from the same
manufacturer.
The depth and
width of this ap-
pliance must cor-
respond with the
dimensions of
the washing ma-
chine.
Do not place the
washer-dryer
stack on a plat-
form.
Do not trap the
hoses and power
cord between the
wall and the ap-
pliance.
Need help?
Do you have a question about the WQB245B0TC and is the answer not in the manual?
Questions and answers