Bosch WQB245B0TC User Manual And Installation Instructions page 44

en Troubleshooting
Fault
The laundry is too
damp.
Creasing.
44
Cause and troubleshooting
The selected programme is unsuitable for the type of
fabric.
Set a time programme for subsequent drying.
▶
→ Page 26
The load is too large.
Observe the programme's maximum load capacity.
▶
→ Page 25
After the end of the programme, warm laundry feels
damper than it actually is.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
The selected dryness level is unsuitable.
Change the dryness level. → Page 33
▶
The dryness level is not adjusted.
Adjust the dryness level. → Page 34
▶
The load is too small.
Set a time programme for subsequent drying.
▶
→ Page 26
The moisture sensor is dirty.
Clean the moisture sensor. → Page 40
▶
The appliance has interrupted the drying process due
to the condensation container being full.
Empty the condensation container. → Page 32
▶
The selected programme is unsuitable for the type of
fabric.
Set a suitable programme. → Page 25
▶
The load is unsuitable.
Observe the programme's maximum load capacity.
▶
→ Page 25
Prepare the laundry. → Page 28
▶
The laundry lies in the drum for too long after drying.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Easy Care fabrics have been dried for too long.
Change or adjust the dryness level. → Page 33
▶
The crease-reduction function is not activated.
Activate the crease-reduction function. → Page 22
▶