Setting The Sleep Timer; Maintaining Your Speaker System - Altec Lansing Moondance Glow M402SR User Manual

Setting the Sleep Timer

Your Altec Lansing speaker system is equipped with a sleep timer that
automatically turns off the unit 5 to 90 minutes after it has been set.
How to Set the Sleep Timer
1
Turn on the speaker system.
2
ensure that your selected audio source is playing.
3
Press and hold the POWeR button for 3 seconds.
This puts you in the Sleep Timer mode.
4
Choose when you want the speaker system to turn off.
Press the or button on your speaker system or the enhanced
remote to select how long the unit should play before going on
standby (in 5-minute increments).
5
Press the POWeR button again.
This takes you out of the Sleep Timer mode.
NOTE Turning off the system will cancel the Sleep Timer.
20

Maintaining Your Speaker System

Place your speaker system on a level surface away from sources of direct
sunlight or excessive heat.
Protect your furniture with a cloth or other protective material when placing
your speaker system on a natural wood or lacquered finish.
Clean your speaker system with a soft cloth moistened only with mild soap
and water. Stronger cleaning agents, such as benzene, thinner or similar
materials, can damage the surface of the unit.