Setting The Clock Display - Altec Lansing Moondance Glow M402SR User Manual

Setting the Clock Display

How to Set the Clock Time and Date
1
Press and hold the CLOCK button for 3 seconds.
The CLOCK button is located on the back of your Altec Lansing
speaker system. This puts you in the Time/Date Set mode.
2
Select either 12-Hour or 24-Hour Clock mode.
Press the or button on your speaker system or the enhanced
remote to select either 12-Hour or 24-Hour Clock mode. Then press
the CLOCK button to save this setting and enter the Hour Set mode.
3
Set the hour.
Use the and buttons on your speaker system or the enhanced
remote to adjust the hour. Then press the CLOCK button to save this
setting and enter the Minute Set mode.
16
4
Set the minute.
Use the and buttons on your speaker system or the enhanced
remote to adjust the minute. Then press the CLOCK button to save
this setting and enter the AM/PM Set mode, if 12-Hour Clock mode
was previously selected. If 24-Hour Clock mode was selected,
pressing the CLOCK button will save the minute setting and place the
unit into Day Set mode.
5
Set AM/PM.
Press the or button on your speaker system or the enhanced
remote to select AM or PM. Press the CLOCK button to save this
setting and enter the Day Set mode.
6
Set the day.
Press the or button on your speaker system or the enhanced
remote to select the day of the week. Then press the CLOCK button
to save this setting and enter the Month Set mode.