Altec Lansing Moondance Glow M402SR User Manual page 19

7
Set the month.
Use the and buttons on your speaker system or the enhanced
remote to select the month. Press the CLOCK button to save this
setting and enter the Date Set mode.
8
Set the date.
Use the and buttons on your speaker system or the enhanced
remote to select the date. Press the CLOCK button to save this
setting and enter the Year Set mode.
9
Set the year.
Use the and buttons on your speaker system or the enhanced
remote to select the year. Then press the CLOCK button to save this
setting and enter the Display Option mode.
10
Set your display options.
Press the or button on your speaker system or the enhanced
remote to select one of the following four display options:
Setting the Clock Display
Song Information/ If song information is available on your iPod or from
Date your radio station, it is displayed. If no song information
is available, only the date is displayed.
Song Information Only the song information is displayed, if available.
Date Only the date is displayed.
Clock Only the clock is displayed.
NOTE The clock is always displayed. The size of the clock is dependent on
the display option.
11
Set the LCD backlight.
Press the or button on your speaker system or the enhanced remote to
cycle through LCD backlight options (off, low, medium, or high.)
NOTE You can also adjust the display contrast by pressing the CLOCK
button one step at a time.
17