Setting The Alarm - Altec Lansing Moondance Glow M402SR User Manual

Setting the Alarm

Your Altec Lansing speaker system has two separate alarms.
How to Set Alarm 1
1
Press and hold the
This puts you in the Alarm Set mode for alarm 1.
2
Turn Alarm 1 on/off
Use the and buttons on your speaker system or the enhanced
remote to select alarm ON. Then press the
setting and enter the Alarm Hour Set mode.
If you select alarm OFF, you will exit the menu.
NOTE
3
Adjust the hour.
Use the and buttons on your speaker system or the enhanced
remote to adjust the hour setting. Then press the
this setting and enter the AM/PM selection mode.
4
Adjust the minute.
Use the and buttons on your speaker system or the enhanced
remote to adjust the minute setting. Then press the
save this setting and enter the Alarm Source Set mode.
18
button for 3 seconds.
button to save this
button to save
button to
5
Select AM or PM.
Use the and buttons on your speaker system or the enhanced
remote to select AM or PM. Then press the
setting and enter the Alarm Day Select mode.
This option is only available if the 12-hour mode was selected when
NOTE
setting up the clock.
6
Select alarm day setting.
Use the and buttons on your speaker system or the enhanced
remote to select the alarm day:
• Choose EVERYDAY to have the alarm go off every day.
• Choose WEEKDAYS to have the alarm go off Monday through
Friday.
• Choose WEEKENDS to have the alarm go off on Saturday and
Sunday.
• Choose ONE TIME to have the alarm go off only once at the next
selected time.
Then press the button to save this setting and enter the Alarm
Source Set mode.
button to save this