Download Print this page

Troubleshooting - Altec Lansing inMotion IM310 User Manual

Hide thumbs Also See for inMotion IM310:

Advertisement

Troubleshooting

Symptom
Possible Problem
No power
The iM310 may not be properly
indicator light
connected to a wall outlet.
is on (AC
The surge protector (if used) may
Operation).
not be powered on.
The wall outlet may not be
functioning.
The power may not be turned on. See instructions in the "Start Playing"
No power
The batteries may not be
indicator light
installed properly.
is on (Battery
The power may not be turned on. See instructions in the "Start Playing"
Operation).
There is no
The volume may be set too low.
sound is coming
from speakers.
The iPod may not be correctly
seated into the docking station.
If using an alternate audio
source, the audio source may
not be properly connected to the
inMotion iM310 or there may
be a problem with the alternate
audio source.
There is a
The iPod may not be correctly
crackling sound
seated into the docking station.
coming from
If using an alternate audio
speakers.
source, the audio source may
not be properly connected to the
inMotion iM310 or there may
be a problem with the alternate
audio source.
Solution
See proper AC Power instructions in the
"Power" section of this manual.
Make sure the surge protector is switched on.
Plug another device into the same wall
outlet to confirm the outlet is working.
section of this manual.
See proper DC Power instructions in the
"Power" section of this manual.
section of this manual.
To increase the volume, see instructions in
the "Volume" section of this manual.
If using an alternate audio source, see
instructions regarding volume level in the
"Connecting to alternate audio source"
section of this manual.
Turn off the iPod, remove it from the docking
station, reseat it, and turn it on again.
• See instructions in the "Connecting to
alternate audio source" section of this
manual.
• Trying using another audio source.
Turn off the iPod, remove it from the docking
station, reseat it, and turn it on again.
• See instructions in the "Connecting to
alternate audio source" section of this
manual.
• Trying using another audio source.
5

Advertisement

loading