The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. BATTerieS CAUTION: Danger of explosion if battery is incorrectly replaced.
Contents Welcome ... ii Safety Information ... 1 Package Contents ... 3 Getting Started ... 4 Placing and Removing Adapters for the iPhone and iPod ... 5 Speaker Features and Indicators ... 6 Speaker Controls ... 7 Clip-On Remote Features ... 9 Listening to Your iPhone or iPod ...
Plug the AC adapter into the wall outlet. How to install the Speaker Batteries Your Altec Lansing Mix speaker system can also be powered by 8 D-size (LR20) batteries (not included). To install the batteries, follow the steps below: Make sure that there is no iPhone or iPod in the system’s dock...
Placing and Removing Adapters for the iPhone and iPod Your Altec Lansing Mix speaker system includes removable adapters for today’s popular iPhone and iPod models. These adapters ensure that your iPhone and iPod properly fit in the speaker system’s dock. As new iPhone and iPod models are introduced, new adapters will be made available to customers.
Speaker Features and Indicators Power/volume increase/ volume decrease knob EQ button Source button LCD display Battery indicator FM stereo indicator Guard for iPhone or iPod Universal docking station for iPhone or iPod Track back button Track forward button FM antenna Two AUX jacks AC adapter jack...
Turn on your speaker system Turn off your speaker system Change audio source Set the graphic equalizer Turn up the volume Turn down the volume Skip to the beginning of the current song on your iPhone or iPod Rewind the currently playing track on your iPhone or iPod Skip to the beginning of the next song on your iPhone or iPod...
Speaker Controls Scan radio stations Listen to an additional iPhone, iPod, non- docking iPod or other portable audio device Enter a personalized power-on message Reset all settings Select FM Band region Check battery status In “FM” mode, press and hold the button.
The clip-on remote lets you operate many functions of your Altec Lansing Mix speaker system: Turn on your speaker system Press the Turn off your speaker system Press the Press the “SOURCE” button to cycle Change audio source through and select the audio source: iPod, FM radio, AUX 1 or AUX 2.
Clip-On Remote Features Play/pause a song on your iPhone or iPod Tune radio stations Seek radio stations Store a radio station Select a preset radio station NoTe For best results, aim the clip-on remote toward the Mix speaker system. In “iPod” mode, press the button to begin playing a selected track.
3rd-generation iPod models, the iPod touch, the iPod nano and the iPhone. Adjust the volume. Rotate the knob on the Altec Lansing speaker system to adjust the system volume. Or, use the “+”and “–” buttons on the clip-on remote. Find your desired song. Press the button on your speaker system or clip-on remote to go to the next or previous track.
Listening to Your iPhone or iPod How to Access Additional Features on Your iPhone or iPod Using the clip-on remote First, select “iPod” mode. Press the “SOURCE” button on your speaker system or clip-on remote until the iPod icon appears on the LCD. Press the P1 button once on the clip-on remote to advance to the next shuffle mode:...
How to Set the Bass and Treble control Using the onboard controls Access the bass and treble settings. Press the “EQ” button once. The Bass Control screen will appear on the LCD. Increase or decrease the bass level. Rotate the knob.
Setting eQ Controls NoTe You can personalize the EQ presets by selecting a Preset EQ then pressing the “EQ” button twice to enter the Bass/Treble Control Mode. There you can make adjustments to the Preset EQs as described in the Bass and Treble Control sections.
Charging Your iPhone or iPod Whenever your iPhone or iPod is docked and your Altec Lansing inMotion Max speaker system is plugged into an AC outlet, your iPhone or iPod is charging (until fully charged) – even if the speaker system is switched off.
If you or a friend has an iPhone, iPod, non-iPod MP3 player or other non-docking audio device, you can enjoy it through your Altec Lansing Mix speaker system as well. Just connect it via the AUX 1 or AUX 2 jack.
Personalizing the Power-On Message Whenever you turn on your Altec Lansing Mix speaker system, the Altec Lansing logo will appear for approximately 3 seconds followed by a personalized message, if you’ve set one. The Mix comes with no preset power-on message. To create a personalized message, just follow these instructions: enter the Message Screen edit Mode.
Troubleshooting Symptom Possible Problem AC adapter isn’t plugged into a wall outlet or the connector isn’t plugged into the power supply jack on the back of the speaker system Speaker system doesn’t Wall outlet is not functioning respond (no power) The batteries are dead.
Symptom Possible Problem iPhone or iPod is not installed properly Your iPhone or iPod software is too old iPhone or iPod doesn’t respond to the speaker system iPhone or iPod is locked up Using 1st- or 2nd-generation iPod, iPod shuffle or other devices iPhone or iPod is not installed properly iPhone or iPod is locked up iPhone or iPod didn’t charge...
CD. Replace current battery with a new battery. Point the clip-on remote toward the Altec Lansing speaker system and move within 10 feet of the unit. Clip-on remote will not control devices connected to the AUX 1 or AUX 2 jack.
Altec Lansing Do to correct the Problem? Altec Lansing will, at its option, repair or replace any product that proves to be defective in material or workmanship. If your product is no longer being manufactured, or is out of stock, at its option, Altec Lansing may replace your product with a similar or better Altec Lansing product.