Troubleshooting - Altec Lansing inMotion Classic IM600USB User Manual

Troubleshooting

Symptom Possible Problem
The surge protector (if used) isn't
The rechargeable
powered on.
battery won't
charge and no The wall outlet is not functioning.
power indicator
light is on (AC
The power isn't turned on.
operation).
The rechargeable battery isn't charged.
No Power indicator
light is on (Battery
The power isn't turned on.
operation).
The volume is set too low.
An incorrect source has been selected.
The iPod is not correctly seated into the
No sound is
docking station.
coming from
speakers.
If using an alternate audio source, the
audio source is not properly connected to
the inMotion Classic or there is a problem
with the alternate audio source.
The iPod is not correctly seated into the
docking station.
If using an alternate audio source, the
audio source is not properly connected to
There is a crackling
the inMotion Classic or there is a problem
sound coming
with the alternate audio source.
from speakers.
There is a crackling The operating system's volume level is
sound coming set too high.
from speakers
(when connected
to PC or laptop).
Solution
If the power supply cord is plugged into a surge protector, make sure
the surge protector is switched on.
Plug another device into the same wall outlet to confirm the outlet is
working.
Turn on the inMotion Classic by pushing the
light turns on.
Recharge the battery (see the "Power" section for details.)
Turn on the inMotion Classic by pushing the
light turns on.
The "+" and "–" buttons control the master volume. Press and hold
the "+" button to increase the volume.
Check the volume level on alternate audio source device and set at
mid-level.
Turn off the iPod, remove it from the docking station, reseat it, and
turn it on again.
Turn off the iPod, remove it from the docking station, reseat it, and
turn it on again.
• Connect an alternate audio source — such as a CD player, MP3
player, or portable DVD player — to your inMotion Classic by
plugging one end of a 3.5mm stereo cable (sold separately) to
the line out of your portable device (if it has one) or to the device's
headphone jack. Connect the other end to the input marked "AUX"
on the back of the inMotion Classic.
• Set the volume on the audio source at mid-level.
• Set the volume on the inMotion Classic at minimum level and adjust
upward to a comfortable listening level.
Turn off the iPod, remove it from the docking station, reseat it, and
turn it on again.
• Connect an alternate audio source — such as a CD player, MP3
player, or portable DVD player — to your inMotion Classic by
plugging one end of a 3.5mm stereo cable (sold separately) to
the line out of your portable device (if it has one) or to the device's
headphone jack. Connect the other end to the input marked "AUX"
on the back of the inMotion Classic.
• Set the volume on the audio source at mid-level.
• Set the volume on the inMotion Classic at minimum level and adjust
upward to a comfortable listening level.
Check the operating system volume level and decrease it if
necessary.
4
button. The indicator
button. The indicator