Advertisement
vs-vx24 VESA adapter
Assembly
instructions
The VESA adapter is compatible with the following Medion and Viewsonic products:
AKOYA P52709 Serie, VX2458
With the VESA adapter, you can easily attach your VIEWSONIC or MEDION monitor
to a monitor arm with a VESA hole pattern (75 x 75 mm). Use the supplied screws
and nuts for this.
Direct wall mounting is NOT possible, as the VESA adapter already contains metric
threads through which no screws can be inserted for mounting to the wall.
support@3idee.eu | +352 661 26 72 76 | help.3idee.eu
Advertisement
Table of Contents
Related Manuals for 3idee vs-vx24
Summary of Contents for 3idee vs-vx24
- Page 1 VESA hole pattern (75 x 75 mm). Use the supplied screws and nuts for this. Direct wall mounting is NOT possible, as the VESA adapter already contains metric threads through which no screws can be inserted for mounting to the wall. support@3idee.eu | +352 661 26 72 76 | help.3idee.eu...
-
Page 2: Important Safeguards
Assembly instructions Important Safeguards Please read this manual carefully and keep it for future reference. If you pass the product on to third parties, this manual should always be included. Ignoring these instructions may result in injuries or damage to people and products, for which we cannot accept any liability. -
Page 3: Waste Disposal
For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area. 4. Manufacturer Information 3idee S.à r.l. 19 Rue de Bitbourg L-1273 Luxembourg Luxembourg mail: info@3idee.eu... -
Page 4: Scope Of Delivery Accessories
Assembly instructions Scope of Delivery Accessories 4x M4x14 screw with cross recess 1x M6x20 screw with cross recess (SP7 or SP2) (SP7) -
Page 5: Horizontal Mounting
Assembly instructions Horizontal / Vertical Alignment Please note: Not all VESA adapters and monitors are designed for vertical (upright) orientation. This limitation is often due to the specific geometry of the adapter or monitor. Do not ignore this information, as the load limit of the adapter can quickly be exceeded if not installed properly. We are continuously working on developing monitors and adapters that are also suitable for vertical orientation. -
Page 6: Assembly Instruction
/ VESA arm. (Figure 2) Figure 2 Step 3 Now plug the 3idee VESA adapter onto your monitor. (Figure Make sure the black plastic piece is properly seated on the monitor base. Figure 3... - Page 7 Assembly instructions Step 5 Now it is important that all holes of the VESA adapter are aligned with the hole in the monitor base. (Figure 5) Hold the VESA adapter in this position to proceed to the next step. Figure 5 Step 6 Now take the M6x20 (SP7 - largest screw in the package) and screw it into the VESA adapter as shown.
- Page 8 Assembly instructions Step 8 Please make sure that all 4 screws are tight. (Figure 8) Figure 8...
Need help?
Do you have a question about the vs-vx24 and is the answer not in the manual?
Questions and answers