Page 1
VESA adapter Assembly instructions The VESA adapter is compatible with the following products from Medion and Viewsonic: AKOYA P52709 Serie, VX2458 The VESA adapter allows you to conveniently mount your VIEWSONIC & MEDION brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts.
Assembly instructions Important Safeguards Please read these instructions carefully and keep them for future reference. If you pass the product on to third parties, these instructions should also always be given. Failure to follow these instructions may result in injury or damage to people and the product, for which we cannot accept any liability.
For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area. 4. Manufacturer Information 3idee Technologies S.à r.l. 5 Um Lenster Bierg L-6125 Junglinster Luxembourg 5.
/ VESA arm. (Figure 2) Figure 2 Step 3 Now plug the 3idee VESA adapter onto your monitor. (Figure Make sure the black plastic piece is properly seated on the monitor base. Figure 3...
Page 5
Assembly instructions Step 5 Now it is important that all holes of the VESA adapter are aligned with the hole in the monitor base. (Figure 5) Hold the VESA adapter in this position to proceed to the next step. Figure 5 Step 6 Now take the M6x25 + washer (largest screw in the package) and screw it into the VESA adapter as shown.