3idee vs-vx24 Assembly Instructions

Table of Contents

Download this manual

vs-vx24 VESA Adapter

Assembly

instructions

The VESA adapter is compatible with the following products from VIEWSONIC

(viewsonic.com): VX2458-C-MHD Curved Gaming Monitor.

The VESA adapter allows you to conveniently mount your VIEWSONIC brand

monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included

screws and nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws

and dowels. (not included in the scope of delivery).

www.3idee.eu

Table of Contents

Need help?

Do you have a question about the vs-vx24 and is the answer not in the manual?

Page 1 VESA Adapter Assembly instructions The VESA adapter is compatible with the following products from VIEWSONIC (viewsonic.com): VX2458-C-MHD Curved Gaming Monitor. The VESA adapter allows you to conveniently mount your VIEWSONIC brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts.
Page 2 / VESA arm. (Figure 2) Figure 2 Step 3 Now plug the 3idee VESA adapter onto your monitor. (Figure Make sure the black plastic piece is properly seated on the monitor base. Figure 3...
Page 3 Assembly instructions Step 5 Now it is important that all holes of the VESA adapter are aligned with the hole in the monitor base. (Figure 5) Hold the VESA adapter in this position to proceed to the next step. Figure 5 Step 6 Now take the M6x25 + washer (largest screw in the package) and screw it into the VESA adapter as shown.
Page 4 We wish you a lot of fun with your product. Your 3idee Team Responsible for this content: 3idee Technologies S.à r.l 5, ZA Um Lenster Bierg L-6125 Junglinster Luxembourg...