Beko QWIK-PURE 10 Installation And Operation Manual page 6

QWIK-PURE ®
2. Safety
2.1 Use
2.1.1 Intended use
The QWIK‑PURE , also referred to below as the "product", is used to treat demulsifiable compressor
®
condensates from oil-lubricated and oil-free compressors. Physical processes are used to separate impurities,
as well as oils that can be directly separated, from the corresponding water.
Any use of this system other than the use described in this manual is hereby deemed to be non-intended and
can cause a hazard for the safety of people and the environment.
The following must be noted for intended use:
• Read and follow the manual.
• Use the product and the accessories exclusively within the operating parameters and agreed delivery
conditions specified in section Technical data.
• Use the product and accessories exclusively with fluids that are free of caustic, aggressive, corrosive,
toxic, flammable, oxidising and inorganic components.
In cases of doubt an analysis must be carried out.
• Use the product and the accessories exclusively within a piping system designed in conformity with the
operating parameters specified in section Technical data.
• Use the product and the accessories exclusively outside of areas exposed to mechanical loads and splash
water.
• Only use the product and accessories outside potentially explosive atmospheres.
• Use the product and the accessories exclusively outside of areas exposed to direct sunlight and heat
sources.
• Combine the product and the accessories only with the recommended manufacturer products and
components indicated in this manual.
• Adhere to the prescribed maintenance schedule.
Before using the product and the accessories, the operating company must make sure that all conditions and
prerequisites for intended use are given.
The product and the accessories have been exclusively designed for stationary use in a commercial or
industrial area. All of the assembly, installation, operation, maintenance, disassembly and disposal work
described must be performed exclusively by qualified skilled technical personnel.
6 | 68
Installation and operation manual