Aiwa XR-MD95 Operating Instructions Manual page 28

SETTING THE SLEEP TIMER
SHIFT
The unit can be turned off automatically at a specified time.
Use the remote control.
7
Press the SLEEP button while pressing the SHIFT
button on the remote control.
2 Within 4 seconds, press the ++ or B button
to specify the time until the power is turned off.
Each time the button is pressed, the time changes between 5
and 240 minutes in 5-minute steps.
Specified time
To check the time remaining until the power is turned
off
Press the SLEEP button once while pressing the SHIFT button
on the remote control. The remaining time is displayed for 4
seconds.
To cancel the sleep timer
Press the SLEEP button twice while pressing the SHIFT button
on the remote control so that "SLEEP OFF is displayed,
CONNECTING OPTIONAL
EQUIPMENT
TAPE IN
AUX IN
LINE OUT
SUPER WOOFER
Refer to the operating instructions of the connected equipment
for details.
The connecting cords are not supplied. Obtain the necessary
connecting cords.
Consult your local Aiwa dealer for optional equipment.
TAPE IN JACKS
This system can input analog sound signals from a tape deck
through these jacks.
Use a cable with RCA phono plugs to connect a tape deck.
m
When using a tape deck to record the sound of this system,
connect the tape deck to the LINE OUT jacks (see below),
AUX IN JACKS
This system can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, VCRs, TV, etc.).
Connect the red plug to the R jack, and the white plug to the L
jack.
When connecting a turntable
Use anAiwa turntable equipped with a built-in equalizer amplifier.
LINE OUT JACKS
This system can output analog sound signals for all functions
through these jacks.
Use a cable with RCA phono plugs to connect audio equipment.
m
Do not connect equipment to the LINE OUT jacks and AUX IN
jacks simultaneously.
Otherwise, noise is generated and malfunctions may occur.
SUPER WOOFER q JACK
Connect an optional powered sub woofer with a built-in-amplifier
to the jack.
28
ENGLISH