1
1
metal securing tabs (2)
Replacing a WWAN Card
NOTICE:
check the connectors on the card and on the system board, and realign the card.
NOTICE:
1 Insert the
board connector labeled "WWAN".
2 Press the other end of the
the card clicks into place.
160
Adding and Replacing Parts
The connectors are keyed to ensure correct insertion. If you feel resistance,
To avoid damage to the WWAN card, never place cables under the card.
card connector at a 45-degree angle into the system
WWAN
2
WWAN card
card down into the securing tabs until
WWAN
2