WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
similar accommodation where such use does not exceed (average) domestic usage levels. • Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be between 0.5 (0.05) / 10 (1) bar (MPa) • Follow the maximum number of 12 place settings. •...
• Warning: this appliance is designed to be installed / connected to a grounding connection in the building. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket.
consequences and might void the • Concerning the lamp(s) inside this product guarantee. and spare part lamps sold separately: • The following spare parts will be available These lamps are intended to withstand for 7 years after the model has been extreme physical conditions in household discontinued: motor, circulation and drain appliances, such as temperature,...
Scan the QR code with the camera on your mobile device to be redirected to My The lamp goes off when you close the door or Electrolux Kitchen app in the app store. switch the appliance off. Otherwise, it goes Follow the instructions on your mobile device off automatically after some time to save to download the app.
4.3 Indicators Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Refer to "Before first use". Salt indicator. It is on when the salt container needs refilling. Refer to "Before first use". Machine Care indicator. It is on when the appliance needs internal cleaning with the Machine Care programme.
Page 10
45 °C. a lower speed. Due to the low speed, the programme duration is longer. 5.4 Extras in the app My Electrolux Kitchen app provides additional ExtraPower dishwashing options. To access all options, connect your dishwasher to the app. See ExtraPower improves the dishwashing chapter "Wireless connection".
Refer to "Care and Cleaning". • Intermediate rinse • Final rinse • AirDry Automatic door opening during the drying phase. Refer to "Basic settings". Available only through My Electrolux Kitchen app. Consumption values Water (l) Energy (kWh) Duration (min) Programme 1)2) Quick 10.3 0.618...
6. BASIC SETTINGS You can configure the appliance by changing basic settings according to your needs. Settings Values Description Water hardness 1 - 10 (default: 5) Adjust the level of the water softener according to the water hardness in your area. Rinse aid level 0 - 6 (default: 5) Adjust the level of the rinse aid according to the neces‐...
The display shows the setting name and its current value. 2. Press OK to enter the setting. The display shows available values. 3. Press Previous or Next to change the value. 4. Press OK to confirm the setting. • The new setting is saved. •...
Page 15
When the rinse aid dispenser is empty, the CAUTION! display shows the indicator and Rinse aid Do not try to close the appliance door low. If the drying results are satisfactory while within 2 minutes after automatic opening. using multi-tablets only, it is possible to This can cause damage to the appliance.
You can connect your dishwasher to the home wireless network and then link it to your If the credentials are not entered, the mobile devices in My Electrolux Kitchen app. dishwasher deactivates the wireless This functionality allows you to remotely connection after some time.
8. BEFORE FIRST USE 1. Make sure that the current level of the 5. Remove the salt around the opening of water softener agrees with the the salt container. hardness of the water supply. If not, adjust the level of the water softener. 2.
1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. Fill the rinse aid dispenser when the 3. Remove the spilled rinse aid with an indicator (A) is clear. absorbent cloth to prevent excessive foam formation.
Make sure that the indicator is on and • The light related to the button is on. your dishwasher is added in My Electrolux • The ECOMETER is off. Kitchen app. If not, refer to "Wireless • The display shows the programme connection".
• The display shows the updated 4. Close the appliance door to start the programme duration. countdown. • The ECOMETER indicates the When you set the delay start, the remote start updated level of energy and water is automatically activated. consumption.
9.10 How to cancel the delay start The function comes into operation while the countdown operates automatically: • When the programme is completed. • After 5 minutes if a programme was not Press and hold for about 3 seconds. started. The appliance returns to the programme selection.
– Make sure that the current level of the 3. Start the Quick programme. Do not add water softener agrees with the detergent and do not put dishes in the hardness of the water supply. baskets. – Follow the instructions in the chapter 4.
10.6 Unloading the baskets 1. Let the tableware cool down before you After the programme is completed, water remove it from the appliance. Hot items can still remain on the inside surfaces of can be easily damaged. the appliance. 2. First remove items from the lower basket, then from the upper basket.
11.4 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.5 Cleaning the filters 4. Wash the filters. The filter system is made of 3 parts. 5.
2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 3.
Page 26
Problem and alarm code Possible cause and solution You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket. • Make sure that there is no damaged fuse in the fuse box. The programme does not start. •...
Page 27
Problem and alarm code Possible cause and solution The programme lasts too long. • If the delay start option is set, cancel the delay setting or wait for the end of the countdown. • Activating options often increases the programme duration. The displayed programme duration •...
Page 28
WARNING! Before contacting an Authorised Service We do not recommend using the Centre, write down the PNC number. appliance until the problem has been Refer to "Basic settings". completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly.
Page 29
Problem Possible cause and solution There are residues of detergent in the • The detergent tablet was stuck in the dispenser and was not washed dispenser at the end of the pro‐ away by water. gramme. • Water cannot wash away the detergent from the dispenser. Make sure that the spray arms are not blocked or clogged.
12.2 Problems with wireless connection Problem Possible cause and solution Activating wireless connection is not • Wrong wireless network ID or password. Cancel the setup and start successful. it again to enter the correct credentials. Refer to "Wireless connec‐ tion". •...
GUARANTEE Customer Service Centres Point of Service Industriestrasse 10 Le Trési 6 Via Violino 11 5506 Mägenwil 1028 Préverenges 6928 Manno Morgenstrasse 131 3018 Bern Langgasse 10 9008 St. Gallen Am Mattenhof 4a/b 6010 Kriens Schlossstrasse 1 4133 Pratteln Comercialstrasse 19 7000 Chur Spare parts service Industriestrasse 10, proof).
Page 32
My Electrolux Kitchen app The software in this product contains components that are based on free and open source software. Electrolux gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://electrolux.opensoftwarerepository.com (folder NIUS)
Need help?
Do you have a question about the GA55SLV and is the answer not in the manual?
Questions and answers