Advertisement
Quick Links
Wellbeing
Gooseneck Spout
Installation and Maintenance Instructions
AMA309
technical data
Inlet Connection
Working Pressure Range
Operating Temperature Range
Flow Rate
Basin / Sink Cut Out Size
Maximum Bench Thickness
Enware products are to be installed in accordance with the Plumbing Code of Australia (PCA) and AS/NZS3500.
Installations not complying with PCA and AS/NZS 3500 may void the product and performance warranty provisions.
Reference should also be made to the Australasian Health Facility Guidelines (AHFG), ABCB and Local Government
regulations when considering the choice of, and the installation of these products.
This product must be installed and commissioned by a qualified plumber.
For use with potable water only.
NOTE: Enware Australia advises:
1. Due to ongoing Research and Development, specifications may change without notice.
2. Component specifications may change on some export models.
I00427_29 Aug 2024
1300 369 273 | info@enware.com.au | enware.com.au
Amara Sink Mixer with
®
15mm (1/2" BSP)
100 - 800 kPa
Hot and cold water inlet pressures should be balanced
0 - 70°C
7.6 L/min (3 Star WELS) - Fitted
3.7 L/min (6 Star WELS), 4.6 L/min (5 Star WELS) -
Supplied in carton
34 - 37 mm diameter
40 mm (20mm with stabilising washer)
Rev. A.1
Advertisement
Related Manuals for Watts ENWARE Wellbeing Amara AMA309
Summary of Contents for Watts ENWARE Wellbeing Amara AMA309
- Page 1 Wellbeing Amara Sink Mixer with ® Gooseneck Spout Installation and Maintenance Instructions AMA309 technical data Inlet Connection 15mm (1/2” BSP) Working Pressure Range 100 - 800 kPa Hot and cold water inlet pressures should be balanced Operating Temperature Range 0 - 70°C Flow Rate 7.6 L/min (3 Star WELS) - Fitted 3.7 L/min (6 Star WELS), 4.6 L/min (5 Star WELS) -...
- Page 2 Lever handle Grub screw Handle plug Allen key 2.5mm Cover cap Cartridge retaining nut Cartridge BENCH Body Base flange O-ring BS130 Swivel Spout Spout O-ring Ø16x3 Spout retainer Aerator washer 18x12x2.8 Aerator Aerator housing Spout fixing screw M4 Allen key 3mm Stabilising washer Fixing washer Fixing plate...
- Page 3 installation • All supply lines must be flushed thoroughly to remove debris prior to the installation of this product, as per AS/NZS 3500.1. Strainers (40 mesh) are recommended if debris is an ongoing problem. • A pressure reduction valve may be required to comply with the recommended maximum supply pressure and/or balanced pressure requirements.
- Page 4 maintenance CLEANING Enware products should be cleaned with a soft damp cloth using only mild liquid detergent or soap and water. Do not use cleaning agents containing a corrosive acid, scouring agent or solvent chemicals. Do not use cream cleaners, as they are abrasive. Use of unsuitable cleaning agents may damage the surface.
- Page 5 REPLACING SWIVEL SPOUT O-RINGS 1. Unscrew spout fixing screw [17] off the tap body using 3mm Allen Key [18] . 2. Pull spout up off the tap body to reveal spout O-rings [12] and retainer [13]. 3. Replace O-rings with new, apply grease to the O-rings.
- Page 6 spare parts DESCRIPTION PART CODE Lever Handle - Amara (Red/Blue) with AMAS-003 grub screw and handle plug Parts: [1] [2] [3] Lever Handle - Amara (Yellow/Blue) AMAS-004 with grub screw and handle plug Parts: [1] [2] [3] Grub screw and handle plug (pack AMAS-005 of 10) Parts: [2] [3]...
- Page 7 dimensions All measurements are in millimetres. www.enware.com.au Page 7 © Enware Pty Ltd...
- Page 8 - WATTS AUSTRALIA EFFECTIVE FROM 20 November 2023 3. Our responsibilities This Warranty Statement applies to products supplied by Australian Valve (a) In the event that the Supplier is reasonably satisfied that there is a Group Pty Ltd (ACN 068 227 270) (AVG) or Enware Pty Ltd (ACN 662...
Need help?
Do you have a question about the ENWARE Wellbeing Amara AMA309 and is the answer not in the manual?
Questions and answers