Watts AMES Deringer Series Installation, Operation And Maintenance Manual

Watts AMES Deringer Series Installation, Operation And Maintenance Manual

Tamper switch recommendation

Advertisement

Installation, Operation and
Maintenance Manual
Deringer
Tamper Switch Recommendation
WA R NI N G
!
Read this manual BEFORE using this equipment.
Failure to read and follow all safety and use information can
result in death, serious personal injury, property damage, or
damage to the equipment.
Keep this manual for future reference.
WARNING
!
You are required to consult the local building and plumbing
codes prior to installation. If the information in this manual
is not consistent with local building or plumbing codes,
the local codes should be followed. Inquire with governing
authorities for additional local requirements.

Tools Required

This list is the recommended tools for installation. Other
versions of the same tool can be used. For example,
allen wrenches instead of allen drive sockets.
#2 Phillips Head Screwdriver
½" LB Conduit Body
½" 90 degree pull elbow
½" close nipples (x2)
IOM-A-DeringerTamperSwitch

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AMES Deringer Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Watts AMES Deringer Series

  • Page 1 IOM-A-DeringerTamperSwitch Installation, Operation and Maintenance Manual Deringer ™ Tamper Switch Recommendation WA R NI N G Read this manual BEFORE using this equipment. Failure to read and follow all safety and use information can result in death, serious personal injury, property damage, or damage to the equipment.
  • Page 2 USA: Backflow T: (978) 689-6066 • F: (978) 975-8350 • AmesFireWater.com USA: Control Valves T: (713) 943-0688 • F: (713) 944-9445 • AmesFireWater.com Canada: T: (888) 208-8927 • F: (888) 479-2887 • AmesFireWater.ca Latin America: T: (55) 4122-0138 • AmesFireWater.com IOM-A-DeringerTamperSwitch 2015 EDP# 2916011 © 2020 Watts...

Table of Contents